DIY Hanging Wine Rack

https://interior-designing.net/wp-content/uploads/2017/07/diy-hanging-wine-rack.jpg

Welcome to new post: DIY Hanging Wine Rack and get new design inspirations. Interior-Designing.net updating latest news about beautiful home designs, home decoration, interior design, Furniture design, Interior design, Bedroom Designs, Living Room Designs, Bathroom Designs, Kitchen Designs, Teen Room Designs, Kids room design ,Accessories design, Decoration design, Accessories design, Dining room design. It’s might be useful for you in decorating your home. You can share elegant pictures on your social network, or pin it in your interest collection. Please support and follow us to get new home design ideas and new design trends.

Keep wine glasses and wine bottles on display and at easy reach with a handmade wine rack you can customize with any size or color! A great option for those needing alternative storage solutions or that host often! This hanging wine rack is the perfect addition to your kitchen or dining area.

Supplies:

• 2 pieces of wood 4″ wide x 16″ or taller


• 3 pieces of wood 4″ wide x 14″


• sanding block


• saw


• pencil


• drill with forstner drill bit (approx 1/2″)


• paint


• paint brush


• wood glue


• hammer


• nails


• straight edge with measure

Instructions:

1. Have your local hardware store cut wood to the specified dimensions listed above (or larger if you want a larger scale wine rack). Sand the edges of your wood pieces.

2. Use a tape measure to mark out 4 points evenly spaced apart in the center of one of the shorter pieces of wood. This will be the part that holds the wine glasses. Drill out the holes with your forstner drill bit and drill (or a drill press if available).

3. Use a straight edge to draw two evenly spaced straight lines from the holes to one side of the the wood. Mark out the edges with a pencil. Make these lines slightly thinner than the hole so that the hole anchors the wine glasses.

4. Use a saw to cut along the edges that you marked with your pencil. This will open up the holder so that the wine glasses can be slipped into the whole.

5. Once the wine glass holder piece is finished, put together the wine rack. Line up the two larger pieces of wood on the outside vertical edges of the rack and place the smaller pieces at the top and middle to lower section of the rack. Place the glass holder portion at the bottom of the rack. Place a small amount of wood glue at the intersections of the wood and let it dry.

6. Use a hammer and nails to attach the wood rack together.

7. Once the rack is put together and the glue has dried, apply a thin even coat of paint to the entire rack and let dry for the amount of time as indicated on the back of the paint can or bottle. Apply a second coat or a glossy clear finish if needed.

Hammer two nails into the wall and hang up the rack. Display your wine glasses and wine for easy access!

You’re reading DIY Hanging Wine Rack , originally posted on Interior Design and home decor websites (as Interior-Designing.net). If you enjoyed this post, be sure to follow Interior Design and home decor websites (as Interior-Designing.net) on Twitter, Facebook and Pinterest.

Source: Shared from www.homedit.com

Read more https://interior-designing.net/diy-hanging-wine-rack
chic interior design, Cioffi Architect, cityhomeCOLLECTIVE, Coats Homes, Cologne